Loading

Auminatus A1 40mm Fan Mount

by g00bd0g, published

Auminatus A1 40mm Fan Mount by g00bd0g Mar 17, 2013

Description

This is to mount 1 or 2 40mm fans to your A1. You will need 2 m3x12 bolts for each fan.

youtube.com/watch?v=BCd_QXGga1M

Recent Comments

view all

I really like these brackets for printing PLA, but after my third fan from TL failed, I decided to upgrade to something more reliable, with ball bearings and perhaps more air capacity.

I went to Digilkey, and came up with these: http://www.digikey.com/scripts...

I settled on the 7cfm version for the outrigger fans and the 5cfm for the hot-end fan. They are quieter than the TL fans, and having more airflow from the outriggers means I can print PLA at a higher speed without warping.

More from 3D Printer Accessories

view more

Makes

Liked By

view all

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

Instructions

I printed at .3mm and 40% infill. Flip the part over to print, I'm too lazy to re-orient the stl.

Comments

You must be logged in to post a comment.

EldRick on Jul 12, 2013 said:

I really like these brackets for printing PLA, but after my third fan from TL failed, I decided to upgrade to something more reliable, with ball bearings and perhaps more air capacity.

I went to Digilkey, and came up with these: http://www.digikey.com/scripts...

I settled on the 7cfm version for the outrigger fans and the 5cfm for the hot-end fan. They are quieter than the TL fans, and having more airflow from the outriggers means I can print PLA at a higher speed without warping.

Top