Eleanor 5" Acro Quad
by dafes, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is my version of an 5" Acro Quad.
It is designed for the following components:
-Naze32 FunFly Controller (without mag and baro)
-DYS 1806 Motors
Some infos can be found here:
NOTE: The Screw Holes are 3,5mm for printing and use with M3 Screws. Maybe you should use smaller holes for milling
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Eleanor 5" Acro Quad by dafes is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving dafes a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure dafes would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).