rectangular drill adapter (MagFloat aquarium glass cleaner)
by summetj, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This adapter allows you to use a drill to rotate a MagFloat aquarium glass cleaner. (Or any rectangular object, if you edit the openscad file...)
Print it. Drill out the hole using a 3mm or 1/8" bit. Insert an M3 Hex Head screw. (I used a 35mm long one). Use a M3 washer and nut to hold the screw in. Grab the screw with your drill's chuck. Place the adapter over the outside half of a mag-float aquarium glass cleaner, and power away!
Edit the openscad file to generate a drill adapter for any rectangular object.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
rectangular drill adapter (MagFloat aquarium glass cleaner) by summetj is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving summetj a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure summetj would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).