Smartphone wall holder
by pixelthecat, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I made this for holding my Galaxy Nexus on the wall while I run on the treadmill - it lets me see the couch-to-5K timing program. The treadmill is parallel and next to the wall, so I wanted something that'd hold the phone perpendicular.
Version 2 has a slightly larger hole for the audio cable. I also rounded some corners to make it look a bit nicer.
Nothing fancy for printing. I printed with 3 shells, 15% infill. The overhang did pretty well on my MakerGear M2 with PLA.
Smartphone wall holder by pixelthecat is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving pixelthecat a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure pixelthecat would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).