Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!
Personalized (covert) luggage tag
by 3daybreaker, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Warning, top and bottom still don't fit. w.i.p.
I always try to keep my personal details private for the crowd. So that Why my luggage tags only have my name on the front. Other address details (Zip only) are on the inside.
This is a personalized tag that does the same
Please 'LIKE' before collecting!
Note: the first (curent) try-out does not fit.
The strap does fit on the strap connector, but that is the only positive effect :-)
The both sides are misaligned, so you can not close the tag.
Please wait for my next release.
Use the OpenScad and replace the last name (comes on outside) and zipcode (comes on inside). Beware: in current version they are scattered all over the code :-)
Print at least 2 copies in different colors and interchange the parts, so the name will show in contrast :-)
Last name will pop-up through cover plate, all other details will stay inside.
Guide the band through the suitcase, back into the assembly and press hard to close.
Publish pictures if possible :-)
Still w.i.p. as I have not yet printed this, so dimensions will change if necessary.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Personalized (covert) luggage tag by 3daybreaker is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving 3daybreaker a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure 3daybreaker would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).