by printingin3d, published
Just a simple shelf to be used between two vertical surfaces - for example two wardrobes in the kitchen - to store light things on it. It was designed as a spice shelf.
You can read more about it here: http://www.printingin3d.eu/item/shelf
We printed one set of it, but didn't use it in the end. We designed a completely different one as you can read on the link.
First, you will need a piece of acrilyc glass. The stl file is build for 6.6 mm thick one - if your one is different in thickness you can download the OpenSCAD files and modify the shelfThick value in the consts.scad file.
After the setup you simply need to print two of them, drill it on and add the acrilyc glass and that's it: you are ready.
Liked ByView All
Give a Shout Out
Simple shelf by printingin3d is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving printingin3d a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure printingin3d would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).