Z Axis Pin
by vonzepplin, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Z axis bearing pin for Ditto 3D.
Tap in on both sides of each bearing to hold them tight in place. You can print a couple and cut them in half to make it easier to position. Check to make sure there isn't any binding of Z axis travel..
Z Axis Pin by vonzepplin is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving vonzepplin a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure vonzepplin would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).