Earbud Box v3s
by Jinja, published
A derivative of Earbud box v3. This one has angled holes more suited to straight headphone jacks.
First print out Hole_Test.stl which has 6 holes in it, from left to right, small to large, 1 to 6. Insert your headphone jack into the holes and decide which one fits the best, then print out the appropriate EarbudBox STL i.e. if hole 5 fits the best, then print EarbudBox_5R.stl or earbudBox_5L.stl. Choose L or R depending on whether your left or right handed, or more precisely, depending on which way you prefer to wind your cable.
Liked ByView All
Give a Shout Out
Earbud Box v3s by Jinja is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure Jinja would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).