Wall Mount for Mohu Leaf Indoor HDTV Antenna
by mninventor, published
A wall mount for the Mohu Leaf Indoor HDTV Antenna. This mount will allow for aiming of the Mohu Leaf antenna.
This was designed to be printed on a Solidoodle 2, hence the 1" spacing on the back of the wall mount.
Print out clamp, arm and wall mount. Check the clamp to see if trimming is needed.
Attach the wall mount securely to the wall; the top screw should be at least 14" from the ceiling to have room to drop the clamp and antenna into the arm.
Attach to the wall mount to wall.
Insert the arm into the wall mount.
Feed the coax cable through the hole in the arm, then the hold at the bottom of the clamp.
Screw the coax cable onto the antenna.
Insert the antenna into the clamp.
Insert the clamp into the arm, with the desired color of the antenna facing out.
Aim the antenna towards your local broadcast tower. To know where to aim the antenna visit: http://transition.fcc.gov/mb/engineering/maps/
Liked ByView All
Give a Shout Out
Wall Mount for Mohu Leaf Indoor HDTV Antenna by mninventor is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
We're sure mninventor would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).