Simulated turbine frame
by tc_fea, published
This is a simulated turbine frame I used as test case for printing an engineering component.
It is about 192 mm across (7.55").
vane_3_130322d.stl is the vane as shown.
vane_130303k.stl is a smaller version 112 mm across scaled down but maintains a 2mm wall thickness
mk_vane_3_130322d.mac creates the geometry and .stl in ANSYS for vane_3_130322d.stl
mk_vane_130303k_good.mac creates the geometry and .stl for vane_130303k.stl
both ANSYS scripts call ansys_2_stl_cyclic_101024a.mac which is available at
Liked ByView All
Give a Shout Out
Simulated turbine frame by tc_fea is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure tc_fea would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).