Afinia Heat Temp Mod Cover
by Bobofreak, published
This thing was made with Tinkercad. Edit it online https://tinkercad.com/things/404CWo2W9dK
This is a modification of http://www.thingiverse.com/thing:29094 UP Temp Mod lid.
While it did fit the Afinia H series the size must be different between the UP! and the Afinia or maybe there was a change with a newer build.
I also found fitting the switch and wiring very tight so I have raised the entire cover to give more room for the switch, harnesses and wires.
I have modified the tabs that lock in the cover to be much thicker with rounder nubs to snap in the top. I have redimensioned it to fit my Afinia.
Thanks - Scott
Update The link to the file download seemed to have an issue. I have uploaded the .STL file again and it is working for me now so there should be no issues
Liked ByView All
Give a Shout Out
Afinia Heat Temp Mod Cover by Bobofreak is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure Bobofreak would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).