Rush N Crush Car Set
by SpaceCowboy850, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
These are cars for the board game Rush N' Crush. It is a futuristic race car game, where each hover car has a suite of weapons it uses against their opponents. I modeled all the cars myself, though Blue Falcon and Fire Stingray are low polygon models inspired by the famed F-Zero SNES video game. Each car is tiny - 20x11x6mm.
Blue Falcon's right fin has trouble printing for some reason. And one of the yellow racer has two tiny fins on the top that are so small they often have trouble printing. Other than that, it should be good.
Update - I plated these and found that not only did it print them faster, but many of the problems listed above went away. I think doing a single print of the cars (I was making them as I finished modelling them) was not giving the plastic enough time to cool before going over it again.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Rush N Crush Car Set by SpaceCowboy850 is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving SpaceCowboy850 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure SpaceCowboy850 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).