Leapfrog 3D Printer Creatr Spool Holders
by david137, published
This thing consists of 3 parts that will hold spools of different diameters on the Creatr spool spindles. The 3 part design allows quick and easy changes of the top part to allow spools with different diameters to be placed on the spool spindle.
The picture shows each part and how it should look when printed and how to place it in the spool spindle. Each part should just snap in place. If it does not you may need to sand/Dremel/cut the excess plastic off. Each part has been printed and tested with ABS and PLA. It is best if you print with infill every layer and .25 layer height.
Liked ByView All
Give a Shout Out
Leapfrog 3D Printer Creatr Spool Holders by david137 is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving david137 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure david137 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).