by james_coleman, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is the logo for our new 3D printing filament supply company, www.MakerStash.com. Its a play on the gear concept that you often see throughout the maker community. It also makes a nice little calibration piece.
The print is not that complex, so it requires very little tweaking. We printed with ABS, and found it helpful to set the first layer's speed to about 30-40%.
MakerStash Logo by james_coleman is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving james_coleman a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure james_coleman would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).