Wing Micro Servo Mount
by odie_wan, published
This is a servo mount for a micro servo. This allows you to mount a servo on it's side without having to glue it in. You can then easily remove the servo if need be.
Print out the servo base and the cover. You glue in the base into the wing (or wherever you want) place the servo in the mount and screw the top cover on with some M2.5 x 6mm flat head screws
Liked ByView All
Give a Shout Out
Wing Micro Servo Mount by odie_wan is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure odie_wan would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).