V5 adapter for jhead compatible extruders
by Vise, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I made this adapter to save time when i need to chage the .5 jhead with the .35 V5. Usually the extruders for jhead are not compatible with the V5, with the adapter you dont need to change extruder anymore!
Print two adapters and assemble as in the picture. There are nut traps to simplify the assembly and Is not necessary remove the adapters to mount jhead again.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
V5 adapter for jhead compatible extruders by Vise is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Vise a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Vise would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).