2 part heart box small
by ajbooker, published
A simple heart box with a 1mm wall thickness for PLA printing. Lid rather loose but adjust to get a tight fit with your specific printer
Printed this with a 0.4mm hot end, PLA 200c and it seems to have come out well with a consistent wall thickness of 1mm +/- about 0.1mm which is good enough for this use.
Liked ByView All
Give a Shout Out
2 part heart box small by ajbooker is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving ajbooker a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure ajbooker would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).