Automatic Rubber Band Blaster-32
by vanmunch, published
History trembled the day the Rubber Band Blaster-32 was first forged. Squeeze the trigger briefly and fire once, hold it down and release a torrent of rubber bands. Quickly reload by simply replacing the barrel and keep going.
Slow motion video: https://www.youtube.com/watch?v=CEQ0T4qCQKU
Uses #32 rubber bands
In addition to the printed parts you will need:
1- Right Angle, Single Sided Geared Motor
1- 2xAA Battery Holder
1- Large, Red Classic Momentary On Switch
1- 7" by 3/8" Dowel
1- 2.5" by 3/8" Dowel
1- Screw Eyes 5/16" Inside Diameter
1- Screw Eyes 1/8" Inside Diameter
1- 5" Two Conductor Insulated Wire
2- 3" Single Conductor Insulated Wire
3- #6x5/8" Screws
2- #4x1" Screws
1- #2x1/4" Screw
1- 4.5' Nylon String
Use your own non printable parts or order the kit with the non printable parts online at http://www.shuttlebaylabs.com
PS This was part of a KickStarter that I did last summer:
Liked ByView All
Give a Shout Out
Automatic Rubber Band Blaster-32 by vanmunch is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
We're sure vanmunch would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).