XKCD emergency frames
12
Likes
310
Downloads
459
Views
Published on February 27, 2011
Description
suddenly two handsigned XKCD comic strips spawned on our whiteboard at the metalab hackerspace (http://metalab.at).
nobody knows for sure where they came from but they are far too cool for normal frames so i made those boxes using our lasercutter, 4mm plywood, 3mm acryl, M4 screws and red paint.
i used the stencil std font to burn a "break glass in case of packetloss" notice on top and "http://XKCD.org" on the bottom.
enjoy! :)
nobody knows for sure where they came from but they are far too cool for normal frames so i made those boxes using our lasercutter, 4mm plywood, 3mm acryl, M4 screws and red paint.
i used the stencil std font to burn a "break glass in case of packetloss" notice on top and "http://XKCD.org" on the bottom.
enjoy! :)
Instructions
you need a lasercutter..
the part on the right is the "glass" and needs to be cut from acryl.
the boxes should be cut from 4mm plywood
the part on the right is the "glass" and needs to be cut from acryl.
the boxes should be cut from 4mm plywood
License
XKCD emergency frames by overflo is licensed under the Attribution - Non-Commercial - Creative Commons license.
More from overflo
I'm going to make one of petg (unbreakable like lexan). What? you cant break me? chicken :P