Hey! This thing is still a Work in Progress.
Files, instructions, and other stuff might change!
Solarbotics-Inspired GM-Series RW2-Compatible Wheel
5
Likes
385
Downloads
350
Views
Published on March 1, 2011
Description
This is a printable plastic wheel for use with the Solarbotics GM-series (i.e. GM2, GM8, etc.; see solarbotics.com/products/gm8/) motors and compatible with the Solarbotics RW2 ( solarbotics.com/products/rw2_t/ ) tires.
I needed a wheel that would fit on the double-flat output of the GM-series motors and also work with the tires of the RW2 wheels for a Sumobot. I designed these in OpenSCAD for printing on a MakerBot.
I needed a wheel that would fit on the double-flat output of the GM-series motors and also work with the tires of the RW2 wheels for a Sumobot. I designed these in OpenSCAD for printing on a MakerBot.
Instructions
Download the STL files for printing immediately, or the SCAD files if you feel like tweaking measurements or shapes. Generate the gcode in ReplicatorG (for the MakerBot) or your program of choice. Print out the wheel, trim it up, and off you go!
You must be logged in to post a comment.
License
Solarbotics-Inspired GM-Series RW2-Compatible Wheel by ottobonn is licensed under the Attribution - Creative Commons license.
More from ottobonn
I think that will also work with the G3 motor (http://store.makerbot.com/sola....
Have you printed it yet?