Rabbit Nose (clip-on)
by UechiMike, published
I made up this little "clip-on" rabbit nose for fun with the kids this year. Print and enjoy! This was inspired to some goofy glasses I saw.
Printed on my ToM w/ a 0.35mm layer height and 25% infill.
There are two versions, one with little "ears" at the ends of the whiskers that can easily be cut off with a hobby knife when finished (the one with raft in the name) and one without. If you have problems with the whiskers curling during the print try the one with the "raft".
After printing color the nose with a pink sharpie.
Liked ByView All
Give a Shout Out
Rabbit Nose (clip-on) by UechiMike is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
We're sure UechiMike would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).