Adapter plate for camera tripod and xtionpro
by Replicantnexus7, published
This is an adapter plate for a standard camera tripod to a xtionpro cam. I didn't want to take apart the base plus be able to use it with a handle, and be able to place it at different heights, so this is working like a champ. The clips aren't strong enough to hold firmly, so rubber bands on both sides are needed for safety. The tripod screw self-threads into the plastic hole. If you use or distribute, please give street cred to Replicantnexus7.
PLA, 20% in-fill, raft, external support, 200mm
Liked ByView All
Give a Shout Out
Adapter plate for camera tripod and xtionpro by Replicantnexus7 is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure Replicantnexus7 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).