Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!
Filament Guild tube holder
by greenlee, published
Use This Project
Give a Shout Out
First design of a spring loaded guide tube to absorb the shock of pulling from a 5lb spool
Printed 200micron 25% fill 2 shells with raft and supports.
Used the spring left over from the print head upgrade http://www.thingiverse.com/thing:42250
When printing using a fresh 5lb spool I noticed that the was a bit of a jerk each time the printer would restart the feed. This is an attempt to diminished that stress.
Filament Guild tube holder by greenlee is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving greenlee a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure greenlee would love to see what you've printed. Please document your print and share a Make with the community.