SMD Component Reel / Film Reel Holder/Hub (parametric)
by blatantsubtlety, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Hub for SMD Component / Super 8 Film reels.
Reels are varying widths so holder needs customising.
Holder is in two parts which lock the reel in place.
They fit over a bolt (eg a shoulder bolt), with a spring to lock the cap castellations into the rod.
Design is optimised for building with minimum support.
If you need one of these you might also need http://www.thingiverse.com/thing:482051
printed at 0.35mm on UP printer.
Designed using OpenSCAD version 2015.01.23 (git 5a0c4b0)
(customizer may not work until it uses a more recent version of openscad)
Using a shoulder bolt for the axle is ideal.
Probably should drill out the axle holes to clean them up, rather than make them too oversize.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
SMD Component Reel / Film Reel Holder/Hub (parametric) by blatantsubtlety is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving blatantsubtlety a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure blatantsubtlety would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).