printable glowing in the dark space shuttle
53
Likes
665
Downloads
2315
Views
Published on March 5, 2011
Description
This afternoon I was looking for some nice space shuttle to print. I found one here thingiverse.com/thing:1966 , but it seemed to be a bit to smooth.
So I googled a little and found some fitting object in the 3D galery. I resized it and repraired it using netfabb and after a short time I printed one with a length of about 105 mm.
The upper wing is a bit too thin to be printable precisely, but it is a little more detailed than the mentioned space shuttle.
But the real cool feature: It is glowing in the dark using phosphorescent PLA.
The model you can download here is scaled up to a length of 135 mm hoping that this size is big enough to print a better wing.
Greetings
BonsaiBrain
More about this and where to get the glowing in the dark PLA: ifeelbeta.de
So I googled a little and found some fitting object in the 3D galery. I resized it and repraired it using netfabb and after a short time I printed one with a length of about 105 mm.
The upper wing is a bit too thin to be printable precisely, but it is a little more detailed than the mentioned space shuttle.
But the real cool feature: It is glowing in the dark using phosphorescent PLA.
The model you can download here is scaled up to a length of 135 mm hoping that this size is big enough to print a better wing.
Greetings
BonsaiBrain
More about this and where to get the glowing in the dark PLA: ifeelbeta.de
Instructions
Print it and feel like an atronaut!
License
printable glowing in the dark space shuttle by BonsaiBrain is licensed under the Creative Commons - GNU GPL license.
More from BonsaiBrain
Watching the Atlantis landing, for the last time. Just printed this to mark the occasion. A lovely little model!