Philadelphia City Hall (Fixed STL)
by gadgetking, published
The comments and linked blog for the original file indicate there are some challenges with both the Sketchup file and the resulting STL. I simplified the Sketchup file and produced a new STL which I then used Netfabb Basic, Meshlab and Netfabb's beta cloud service to repair. You may not be able to fight city hall, but you can now 3D print it!
I printed it with 2 shells and 25% infill. Yeah, it took a while- about 4 hours. I'm sure you could get away with less infill.
Liked ByView All
Give a Shout Out
Philadelphia City Hall (Fixed STL) by gadgetking is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure gadgetking would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).