JTAC TAC5 Powertube
by Lokki, published
Design for a replacement JTAC TAC5 Paintball marker powertube.
Liked Byview all
Give a Shout Out
Requires a large building height!
This part was designed after finding that it has been discontinued and is no longer available, thus rendering a rather good paintball marker unusable.
Please use caution if you intend to make this, it remains untested in the field.
Concept is to print this in ABS and use the acetone fogging method to smooth all surfaces.
Remember, this will be carrying CO2 and should be treated carefully.