Busininess card box
by pintokitkat, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
A small box, barely larger than the 85x55mm cards it holds, with a sliding, locking lid.
To use, hold it in your left hand, fingers underneath, thumb on top and with the tab to the right and on top. Use your left thumb nail to lift the tab to disengage the lock and push the bottom drawer out with your left fingers supporting it with your right fingers.
To close, push it closed using your thumb nail under the tab to guide the drawer shut.
I printed it in ABS at 0.22mm height and two skins. That seemed to work ok.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Busininess card box by pintokitkat is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving pintokitkat a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure pintokitkat would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).