Enhanced iPhone Dock
Description
I have modified Zaggo's original design to make the slot a lot bigger and square, it now fits my iPhone 4 with its case on. It should still fit the 3G series and probably a lot of other Apple devices as it's quite a large slot.
I've printed this in translucent blue PLA on my MakerBot Thing-O-Matic, you should be able to print it in ABS as long as you have a heated build platform.
I've printed this in translucent blue PLA on my MakerBot Thing-O-Matic, you should be able to print it in ABS as long as you have a heated build platform.
Instructions
Print it out and insert your iPhone docking cable into the base, route the cable through the channel.
You must be logged in to post a comment.
ktolbol
on
June 10, 2012
said:
I had "not manifold near edge 76-77" and "overlapping or self-intersecting facets"-warnings when slicing in Slic3r, but I tried to print anyway. It came out as something like a hollow box (see attached).
Did I do something wrong?
Dithermaster
on
April 29, 2012
said:
Wow, this works great! The plug has a perfect friction fit. My wife's iPhone 4S with case works great. Thank you!
bbriggstkd
on
July 22, 2011
said:
When I run the STL through Skeinforge, I get a lot of hole in the the triangle mesh errors. Is there a way to fix that?
reprapperMC
on
March 15, 2011
said:
Not sure if it is my printer but the cord slot was a bit too small. Otherwise, it printed nice and works great!
Mothra78
on
March 10, 2011
said:
Thanks for the design!
I just printed one and it fits perfectly under my wifes iPhone 3
License
Enhanced iPhone Dock by RobertHunt is licensed under the Attribution - Non-Commercial - Share Alike license.
More from RobertHunt
More from Mobile Phone
The one I printed is t=not the same as the one in the picture...