Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!
Shotgun Mic Shock Mount Grip
by bipedal, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
A stylish handheld shock mount. Dimensioned for a Rode NTG1/2, should work for any mic with a diameter of about 22mm or less, though.
Fits a 3/8" nut in the base of the handle for a standard mic pole/boom/whatever. Uses a 1/4" bolt and nut for the articulated head bit. Requires some rubber bands.
Edit: Whoops, forgot to upload the pieces as separate STLs. Fixed.
Edit again: Redesigned the hooks to hold the rubber bands in a way that's actually printable.
Edit Again: Removed speed holes (weren't printable), added supports, reoriented grip for better printing.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Shotgun Mic Shock Mount Grip by bipedal is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving bipedal a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure bipedal would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).