Solar angel sphere
by sunnycanuck, published
Use This Project
Give a Shout Out
this is a half sphere with markings every 5 degrees and a cross hair on the front plane. The idea is to use it to measure angle misalignment of a solar panel relative to the sun. It has a range of -90 degrees and you can pretty easily read off with 2 degrees of resolution.
It can be read from the front or that back, and has a 1/4-20 hole on the side to mount it.
I printed it on the Ultimaker at normal resolution, with the opening facing down and no infill, and it turned out quite good.
Solar angel sphere by sunnycanuck is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving sunnycanuck a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure sunnycanuck would love to see what you've printed. Please document your print and share a Make with the community.