80s/90s Honda Civic/CRX headlight adjust anchor
by DrewTM, published
My 1989 CRX has a little plastic anchor that holds the headlight up/down adjustment screw into a sheet metal panel. I believe it's the same on all the civic family across quite a few adjacent years, and is probably used elsewhere on the car, too.
Print the opened-up version so that the layers are oriented in a stronger direction (each layer going through the sheet metal and back out). I included the closed version stl so you can see what it looks like after you fold it.
Pop it into the square hole in your sheet metal and screw your screw into it. (M6 thread, I think?) I have a pair holding my headlights in position right now.
Liked ByView All
Give a Shout Out
80s/90s Honda Civic/CRX headlight adjust anchor by DrewTM is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure DrewTM would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).