X-ends for holding 20x20 extrusion 3 hole delrin/lm8uus for lm10uus
by Simonious, published
x-ends compatible with the 3-hole delrin lead-screw nuts and and LM10UUs.
These x-ends don't hold x-rods, they hold a single 20x20 extrusion.
both ends have an integrated bolt holder meant to interface with a z-endstop held in the lower part from thingiverse.com/thing:28425
By the way these are intended for 605zz idler bearings, you'll have to enlarge the hole either before or after printing if you intend to use 608zzs.
Liked ByView All
Give a Shout Out
X-ends for holding 20x20 extrusion 3 hole delrin/lm8uus for lm10uus by Simonious is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure Simonious would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).