by SCaruthers, published
This was my first thing, a spatula, which is intended to help scrape objects from the print platform.
Might want to use a "helper disk" on the handle end to help secure to the printing platform, since the bottom is curved. (Be sure to print flat side down, not ramped side down, for better results.)
The file "spatula3.stl" has a slightly thicker base to help support the "blade".
Liked ByView All
Give a Shout Out
Platform Scraper by SCaruthers is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving SCaruthers a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure SCaruthers would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).