Printrbot Nozzle Case
by Jerrill, published
This is the nozzle case featured on http://www.jerrill.com. It works with standard 7/16" Printrbot nozzles as well.
If you've been making nozzles with the Printrbot Nozzle Fabrication Toolbox (http://www.thingiverse.com/thing:53316) then you probably need it!
You will need to use super glue to attach the nameplate to the cover.
If you are printing the logo in a separate color from the nameplate as shown in the photos, then you'll need to use a Z offset of 2 mm when printing the logo-only.stl file after changing the filament.