ViKi LCD freestanding case mount - mounting bezel
by TysonL, published
ViKi LCD mounting bezel done in Sketchup, with a second back piece to make it a freestanding case. Use the bezel Sketchup file as a starting point for you own custom mount, or print both STL files and use together for a case.
Print both halves. When the mating surfaces are printed on glass, they go together nicely with 2 smooth surfaces. Prints easy, no overhang.
Layer height = 0.25mm
Fill = .2 honeycomb
Shell Top, Bottom, Vertical = 2
4x M3x12mm (minimum, could use longer)
4x M3 nut
4x M3 washer
The hardware holds the display and both case halves together.
Liked ByView All
Give a Shout Out
ViKi LCD freestanding case mount - mounting bezel by TysonL is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving TysonL a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure TysonL would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).