2060 Aluminum Extrusion drilling profile
by mitchese, published
I am working with 2060 aluminum extrusions and needed a drilling template for mounting things to the extrusions.
Print this out and place on the edge of whatever you are cutting, then the holes will be lined up with the slots in the extrusion.
Works for plexiglass, also if you only need to drill on the "20" side (just use the first row of holes!)
The grid is spaced 20x20 so it will work in either orientation. First row is 10.1mm from the edge of the guide (0.1mm extra). The side opposite the guide has an extra 5mm