Shot Glass 7 sides twisted
30
Likes
776
Downloads
1208
Views
Published on March 20, 2011
Description
A simple shot glass. Seven sided and twisted using a helix tool in the CAD software. Mounted on a flared to base to reduce the chance of tipping. The interior has been rounded to ease cleaning. Should hold very close to an ounce of liquid. These are the first part of a slightly larger project.
Instructions
For 3D printing, a solid infill is recommended to reduce the chance of leaking. The original set saw some outdoor winter use and the guess is that some shrinkage resulted in a slight leak in some of the glasses. A later printing with an infill of 1.0 hasn't had this problem.
You must be logged in to post a comment.
License
Shot Glass 7 sides twisted by HoagieBoy is licensed under the Attribution - Non-Commercial - Share Alike license.
More from HoagieBoy
This is a beautiful model to print! Just be careful when removing it from your build platform - if you don't have good layer adhesion, it may break in half like mine did!