Loading

Real Art Brand Skateboard Riser Pad

by s015mcs, published

Real Art Brand Skateboard Riser Pad by s015mcs Apr 11, 2013

Description

Universal hole/slot pattern to fit all trucks and decks. Uploaded files:
"Skate Riser_15875.STL" is 1.5875mm (1/16") thick
"Skate Riser_3175.STL" is 3.175mm (1/8") thick
"Skate Riser_635.STL" is 6.35mm (1/4") thick.

Recent Comments

view all

Great model(s). Printed the 1/4" version at 80% fill with PLA; worked excellent on my eVolution (Mendel-based) printer w/ 0.4mm head. Figure I'll try these risers on my board and see how it goes tomorrow. If they don't hold up, I'll print another set at 90% or 100% fill and see how those go. Will post updates here as I test them out.

That's pretty sweet. I definitely will check that out! Thanks bro

Use Kapton tape for the super gloss finish. The tape also securely holds your part to the platform during build too, never curls! I had major curling problems on my thing-o-matic before I started using the tape. The tape only needs changed after 50+ builds: http://store.makerbot.com/kapt...

More from Sport & Outdoors

view more

Liked By

view all

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

Comments

You must be logged in to post a comment.

HID on Nov 4, 2013 said:

Great model(s). Printed the 1/4" version at 80% fill with PLA; worked excellent on my eVolution (Mendel-based) printer w/ 0.4mm head. Figure I'll try these risers on my board and see how it goes tomorrow. If they don't hold up, I'll print another set at 90% or 100% fill and see how those go. Will post updates here as I test them out.

itsjames on Apr 22, 2013 said:

Neat! How did you get the pad so shiny? Mine comes out pretty fuzzy after the print finishes/

s015mcs on Apr 22, 2013 said:

Use Kapton tape for the super gloss finish. The tape also securely holds your part to the platform during build too, never curls! I had major curling problems on my thing-o-matic before I started using the tape. The tape only needs changed after 50+ builds: http://store.makerbot.com/kapt...

Top