Pogo Pin Charging Dock - Circuit
by txoof, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Circuit board for the Galaxy Nexus Pogo Pin Charging Dock
This dock allows charging through the pogo pins on the Nexus Galaxy using a standard wall charger.
Please see the this thing for more information: (http://www.thingiverse.com/thing:63756)
Etch this circuit and solder it up as shown in the pictures.
2x pogo pins (http://www.digikey.com/scripts/dksearch/dksus.dll?vendor=0&keywords=ed8186-nd
1x Male USB A plug (https://www.sparkfun.com/products/437)
The PDF file should provide an adequate mask. The PDF is set to be printed on A4 paper. The screw hole origins should be separated by 16mm and 35mm.
Pogo Pin Charging Dock - Circuit by txoof is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving txoof a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure txoof would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).