Portabee Z Rod Constraint
by tkc_exp, published
So I made
Recent Commentsview all
If the feed screw of the Z-axis is mounted plumb the print bed, there is nothing significant in this Mod.
However, it can be obtained by a complete vertical coupler is difficult.
So, I tried to deal with this Mod.
Still, because there is the risk of a certain amount of vertical is not made??, leading to trouble the feed screw is in contact with the bearing, it is required arrow tension adjustment.
It is not a English speaker, I am using a machine translation.
If I had a rather strange sentence, I'm sorry.
The Z-rod design in Portabee is quite robust, it should not shift within a single print ..
What can be of concern, is the rods slowly being pulled inwards over time,
Usually we just re-align our Portabee every so often,
However this mod addresses this, mega win! huzzah!
Liked Byview all
Give a Shout Out
You must be logged in to post a comment.