Mixer slider nobs (compact)

by Addidis, published

Mixer slider nobs (compact) by Addidis Apr 13, 2013

Thing Info

867Views 235Downloads Found in DIY
Report Thing


Its a nob for a slide pot. It is for the mixer pictured, I designed the mixer to be small so these are pretty narrow to fit it. But they should work if you have some 10k slide pots. They have holes for set screws but fit snug. Print a few out at a time or they tend to melt.

More from DIY

view more

Thing Info

867Views 235Downloads Found in DIY
Report Thing


Liked By

View All



Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

All Apps

This extension connects Thingiverse with Makeprintable, a cloud-based mesh repair service that analyzes, validates and repairs most common mesh errors that can occur when preparing a 3D design file...

App Info Launch App

Kiri:Moto is an integrated cloud-based slicer and tool-path generator for 3D Printing, CAM / CNC and Laser cutting. *** 3D printing mode provides model slicing and GCode output using built-in...

App Info Launch App
KiriMoto Thing App

They go on easier than they come off. If its tight you might consider opening the hole a bit before you jam it on if you might need to get it off. One of the finished nobs printed slightly smaller. It went on easy enough but when I went to put the button pushers in between the face and the pcb the one did not want to come off and I had to pry it off with a screw driver. So just a heads up if it is something you expect to have to remove like I did some maybe tighter than others , and moreso when trying to take them off than when going on. I landed up having to repaint the face so I figured I would drop a note here.