External RAMPS Housing
by tkramm, published
For milling with my PRotos i needed to detach RAMPS from the printer. I made this housing as a first test for wood cutting with my RepRap.
Recent Commentsview all
Liked Byview all
Give a Shout Out
Material used was 3mm ply wood.
Cut all parts once, except the side. The side part is needed 2 times.
Arduino is fixed on the bottom plate with cable-ties.
Put everything together and put cable ties or screws through the holes in the noses. I used cable ties on the bottom plate and screws on front an backplate nose, to have the top plate easily removeable.
Fan is 80mm