SUNHOKEY ACRYLIC PRUSA I3 Y-axis Stepper Mount
by 13DjjC13, published
This mount is to replace the stock mount for the y axis stepper motor.
The mount flexes when under belt tension and my engineers mind cringed at the idea. So i designed this up.
PRINT WITH NO LESS THAN 1.2MM WALLS AND 25% INFILL!
Install with same hardware and location as stock part.
Liked ByView All
Give a Shout Out
SUNHOKEY ACRYLIC PRUSA I3 Y-axis Stepper Mount by 13DjjC13 is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure 13DjjC13 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).