Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!
RAPIRO - Metabee edition by Atomic Lab
by tubaro1, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a Work In Progress about the mod of RAPIRO. I took the Metabee concept and did my best with basic knowledge of Blender. :)
I print it in my UP! Mini, so all the pieces fits in a 12 cm^3 printer. So big robot in a small printer!
To do that, I print this cut-down head: http://www.thingiverse.com/thing:335012 from Geoffro.
Then I mix the original RAPIRO http://www.thingiverse.com/thing:309466 from ShotaIshiwatari with circles, squares, etc to mod it and be similar to Metabee.
From the creator thing:
RAPIRO is a cute and affordable robot kit designed to work with a Raspberry Pi. It comes with a Arduino-compatible servo controller.
Comes with 12 servo motors and full-color LED of eyes.
Easy assembly. Anyone can assemble a RAPIRO with only a screwdriver, without the need for any soldering.
The servo control board is programmable and is completely compatible with the Arduino.
Designed to mount the Raspberry Pi and Camera module in the head.
*Designed to mount a PSD distance sensor and speakers.
Credit to Atomic Lab. www.atomiclab.org
Look for us in facebook or twitter as theatomiclab!
The shooter.stl must be glued to the arm, the rest, follow Rapiro instructions
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
RAPIRO - Metabee edition by Atomic Lab by tubaro1 is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving tubaro1 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure tubaro1 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).