Canon EF Extension Tube v1 - 50mm
by martinmunk, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a rev1 of my extension ring set for the Canon EF mount.
This part is designed to be printable without any support material. A well adjusted printer is necessary fo a tight fit.
Extension tubes are mainly used to reduce the focus distance of a lens for macro photo.
Better fit, locking, texture and electrical contacts are planned for later versions.
The sample photos are taken with a Canon 550D (T2i), a 70-200 F/4 USM and a total of 100mm extension (2x this part)
Please leave feedback, photos and the like in the comments! :)
Amplivibe did what i newer got around to do and remixed this to different lengths at http://www.thingiverse.com/thing:334254
Canon EF Extension Tube v1 - 50mm by martinmunk is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving martinmunk a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure martinmunk would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).