Printable groove mount plate for Jhead + greg wade's modified extruder reloaded
by labsud, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This mount plate is designed for most commonly used 12mm diameter hot end groove mounts. It works with J-Heads, Makergear hot ends and other designs with the same mounting option.
It have been modified to raise 6mm up extruder, and allow a greg modified wade extruder reloaded to be mounted with big gear above belt clip.
It is machinable or prinable (ABS only!!!)
Derived from http://www.thingiverse.com/thing:55024, and redrawn with sketchup (sources provided).
Printable groove mount plate for Jhead + greg wade's modified extruder reloaded by labsud is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving labsud a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure labsud would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).