PBC Linear SIMO mount for 2060 aluminum profiles
by mitchese, published
This part is a small piece to mount the PBC Linear SIMO stages from the Aluminatus to a 2060 profile.
Give a Shout Out
The part contains 5 holes - 3 are countersunk and are spaced 20mm apart to be connected to 2060 profiles. Use M5x10mm bolts here. Three are probably unnecessary, but the holes are there.
The outer two holes are intended to be tapped for M6 bolts. These line up with the SIMO holes where you can use an M6x20 or M6x25 bolt for mounting.
Print out two copies (one for each end of the SIMO stage. You will need 4-6 M5 bolts and 4 M6 bolts.
This part is also being laser cut in 5mm aluminum, however the cutter won't be done for another week and I want to try out my SIMO stages today, so this is the short-term solution. I would recommend for durability having these machined out of aluminum (and this 6 copies of this shape is included in my Y Table cutout)