Loading

Custiomizable Name Tag

by Jhack, published

Custiomizable Name Tag by Jhack Apr 16, 2013

Description

Dual colour name tag that can be printed on the makerbot replicator 2

Recent Comments

view all

Thanks! :)

this is the makerbot video on dual extrusion http://youtu.be/_p_znpJfC-4

i don't have a dual extruder, but the process is. load both files into your softwear and select the text layer for different colour, both files should be set on the build plate and alined up both files have the same outer size to make it easyer.

hope this helps.

How do you convert this for dual extrusion? Thanks!

More from Signs & Logos

view more

Liked By

view all

License

Custiomizable Name Tag by Jhack is licensed under the Creative Commons - Attribution license.

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

Instructions

found that .8mm text depth is about the max you can go before the hot end starts to hit on the text when printing the back.

i printed out at the text at 0.27mm layer, this is makes the text depth 3 layers thick then with out removing part i then printed the back out at the same settings.

youtube.com/watch?v=IxjorC2eRLM

Comments

You must be logged in to post a comment.

Myles on Jun 18, 2013 said:

How do you convert this for dual extrusion? Thanks!

Jhack on Jun 18, 2013 said:

this is the makerbot video on dual extrusion http://youtu.be/_p_znpJfC-4

i don't have a dual extruder, but the process is. load both files into your softwear and select the text layer for different colour, both files should be set on the build plate and alined up both files have the same outer size to make it easyer.

hope this helps.

carlandj on Apr 16, 2013 said:

Is there any reason you don't print the part upside down with the back printing first then the text on top?

Jhack on Apr 16, 2013 said:

I haven't tryed it but if you remove the foot and have a thin backing it could be done.

Top