Re-Upload: Japica Printrbot Base
by Datenkrieger, published
I noticed that these files have disappeared too when [lux linutz](http://www.thingiverse.com/Lux_Linutz/) reuploaded the JapicaBot files. Since I'm currently adding them to my Printrbot I thought I reupload them as well so they are not lost.
The foot part is my own design, ony useful if you don't mount the Y-motor to the base (I use the alternative y-motor mount in the center between the base parts).
Recent Commentsview all
I still have all files if anyone is interested. I didn't get very far with prints as my bases started cracking and all that slop translated to a poor print. Has anyone had good results with their iteration of the Japica?
Great, it's probably easier to find if all Japica stuff is in one place. But to be clear, these are not for Japica Bot but for upgrading a standard Printrbot, only 2 Z-Rods and it's just the base for a 608 bearing Y-axis. The 608 Bushings are probably also needed for the Japicabot, maybe also the high clamps.
Liked Byview all
Give a Shout Out
You must be logged in to post a comment.